San Andreas / Trenler
GTA V Freight Locomotive
- SergeDV | yükleyen: SergeDV
- 04/19/2019
- 8688 İndirme
Puanlamalar:
Lütfen önce giriş yap.
Favoriler:
Videolar
Henüz hiç video eklenmedi.Bu moda video eklemek için giriş yapmış olman gerekir.
Açıklama
The Freight locomotive and reversed locomotive from GTA V. There are variants with smoke.
- Replaces Freight (ID 537) and Freight2 (new ID 612)
- Custom Collision and Shadow
- Adapted to script "Animtrain v1.1"
- Replaces Freight (ID 537) and Freight2 (new ID 612)
- Custom Collision and Shadow
- Adapted to script "Animtrain v1.1"
Yorumlar
Şu ana kadar 6 yorum gönderilmiş.
08/04/2019 13:31
@MR.TanagoENJ7/@MR.TanagoENJ8 is the f*ckin' idiot. You're the shit stealer
Alıntı yap | Cevapla | (5)
@MR.TanagoENJ7/@MR.TanagoENJ8 is the f*ckin' idiot. You're the shit stealer
Alıntı yap | Cevapla | (5)
05/27/2019 02:57
@SergeDV, I am thinking that as a train-head CJ/ped can drive the reverse model and consequently pushing the attached carriages instead of towing them.
I've just upload a vehicle spawner mod (waiting for approval) including train types that's why during testing I find this mod of yours a little bit odd but craftly done beautifully.
Alıntı yap | Cevapla | (0)
@SergeDV, I am thinking that as a train-head CJ/ped can drive the reverse model and consequently pushing the attached carriages instead of towing them.
I've just upload a vehicle spawner mod (waiting for approval) including train types that's why during testing I find this mod of yours a little bit odd but craftly done beautifully.
Alıntı yap | Cevapla | (0)
05/26/2019 13:16
You can drive it (the model has ped_frontseat dummy) but CJ/ped will sit like on the screen. https://i.imgur.com/KJHkkb8.jpg
I could rotate the armchair in 180 degrees but CJ's/ped's legs are out of the cabin.
I could move the dummy like in standard model (left seat in the cabin) but it needs new handling settings (otherwise CJ/ped will not be able to sit down in the reverse model = another distance from a door dummy to seat dummy). Also CJ's/ped's legs are out of the cabin.
So I think the reverse locomotive is good like a wagon. But it remains possible to drive it if it is a first locomotive.
Alıntı yap | Cevapla | (1)
Quote: eliab-kulot
But CJ can drive it when configured as a train-head. If the model was intended for carriage use only then I got it. Anyway, nice work! Thanks.
You can drive it (the model has ped_frontseat dummy) but CJ/ped will sit like on the screen. https://i.imgur.com/KJHkkb8.jpg
I could rotate the armchair in 180 degrees but CJ's/ped's legs are out of the cabin.
I could move the dummy like in standard model (left seat in the cabin) but it needs new handling settings (otherwise CJ/ped will not be able to sit down in the reverse model = another distance from a door dummy to seat dummy). Also CJ's/ped's legs are out of the cabin.
So I think the reverse locomotive is good like a wagon. But it remains possible to drive it if it is a first locomotive.
Alıntı yap | Cevapla | (1)
05/26/2019 12:51
But CJ can drive it when configured as a train-head. If the model was intended for carriage use only then I got it. Anyway, nice work! Thanks.
Alıntı yap | Cevapla | (0)
Quote: SergeDVQuote: eliab-kulot
The driver of the reverse model also in a reverse position?
Driver's seat on the left while driving. This is necessary in order not to change the standard settings (handling.cfg).
The reverse model is not intended for driving in GTA. The model must be a second locomotive (first wagon) after a (first) locomotive.
https://i.imgur.com/KJHkkb8.jpg
But CJ can drive it when configured as a train-head. If the model was intended for carriage use only then I got it. Anyway, nice work! Thanks.
Alıntı yap | Cevapla | (0)
05/17/2019 13:14
Driver's seat on the left while driving. This is necessary in order not to change the standard settings (handling.cfg).
The reverse model is not intended for driving in GTA. The model must be a second locomotive (first wagon) after a (first) locomotive.
https://i.imgur.com/KJHkkb8.jpg
Alıntı yap | Cevapla | (0)
Quote: eliab-kulot
The driver of the reverse model also in a reverse position?
Driver's seat on the left while driving. This is necessary in order not to change the standard settings (handling.cfg).
The reverse model is not intended for driving in GTA. The model must be a second locomotive (first wagon) after a (first) locomotive.
https://i.imgur.com/KJHkkb8.jpg
Alıntı yap | Cevapla | (0)
05/16/2019 22:40
The driver of the reverse model also in a reverse position?
Alıntı yap | Cevapla | (0)
The driver of the reverse model also in a reverse position?
Alıntı yap | Cevapla | (0)